The SCREW HARVESTOR is the optimum solution for fast, clean, and efficient harvest of shrimp and fish.
The Harvest is one the most intense task in aquiculture, and perhaps the riskiest one. Large crews of laborers are usually involved in the harvest; the products is exposed to deterioration due to the harvesting methods used, or to contamination for excessive handling. As a consequence of all these, the Aquiculture Industry and the International markets are beginning to apply rigorous quality standards for the handling of the product (HACCP Regulations).
|
 |
 |
Time reduction in Harvests. |
|
Higher yields of prime quality product for the market. |
|
Significant reduction of contamination for manipulation of product. |
|
Animals stress reduction during the harvesting process. |
|
Notorious reduction of labor, and substantial improvement on working conditions during the harvest. |
|
 |
"ARQUIMEDES" Screw, fixed to the equipment's body. |
|
There is no relative speed between the screw and the walls of the equipment; the complete unit rotates.
|
|
The screw is entirely built on Fiber Glass. |
|
Structure built on galvanized 1 ½" pipes.
|
|
The equipment can be towed around the farm by any vehicle.
|
|
Equipment's operational altitude is manually set. Bi-directional discharge system, through a flexible hose.
|
|
Power provided by an 8 hp diesel engine or electric motor.
|
|
Based on the farms typical harvesting structures, ETEC will supply a transition basket adaptable to the structures.
|
|
There are no oils or potential contaminants for the product.
|
|
