GENERAL SPECIFICATIONS IMPELLER DIAMETER 6" Flow Rate - GPM 1268 Flow Rate- Lts./Sec. 80 Operation Speed (RPM) 1200 Dimensions L, W and H 2 x 1.5 x 1.7 Total Dynamic Head (MTS) 12 Pump Weight (Kgs) 800 Pump Element Weight (Kgs) 80 Drainage for civil works and constructions. Tank drainage or difficult access compartments. Supply of water to water tanks from different bodies of water. Drainage of wells, swimming pools, ponds, constructions and terrains. Doesn't require priming procedures to start operating. Management of residual waters, mud and small solid material. Easy to move and transport. Manages dynamic heads up to 12 meters. Autonomous equipment to work with residual waters. Quick installation and start up. High durability and reliability. Easy maintenance.   Body of the pump made entirely of 304 Stainless steel.   Hydraulic engine coupled directly to the impeller.   12 meter long hydraulic system hoses with quick coupling system.   6" discharge 12 meter Plastron hoses with fast coupling.   Manual 500 kgs winch to maneuver the pump in manholes.   Air cooled engine with starter motor and complete control panel.   Control valve with reverse to unblock with a mirror type mechanical system. Hydraulic System The engine moves a hydraulic pump which will make the oil circulate.   High pressure hose that feeds the hydraulic system and a return hose.   Relief valve and hydraulic oil filter at suction and discharge. Steel tank for the hydraulic fluid and gas tank for the diesel engine (21 gallons each). Trailer Two wheel trailer with great maneuverability.   Front jack for independent work.   Rear shaft with springs, heavy duty bearing with grease for lubrication.   2"ball tow system.   A structural bar permits to haul up the complete equipment in case it is required. Note: The trailer is designed for countryside transportation. It is the customer's responsibility to comply with the traffic laws at the place of destiny.